Netgear Ac1750 Wi Fi Not Working

Are you struggling with your Netgear Ac1750 Wi Fi not working? Don’t worry, we’ve got you covered with expert tips to troubleshoot the problem and reconnect to your online world without delay.

Possible Causes and Fixes for Netgear Ac1750 Wi Fi Not Working

When your Netgear Ac1750 Wi Fi is not working, there could be various causes. Let’s explore some common issues and effective fixes to get your Wi-Fi up and running again.

One possible cause of the issue could be a broken cable. Check all the cables connected to your Netgear Ac1750 router, ensuring they are firmly plugged in and not damaged. If you find any broken cables, replace them with new ones to restore connectivity.

Another potential cause could be firmware update trouble. Sometimes, updating the firmware of your router can cause compatibility issues or glitches. To fix this, you can try rolling back the firmware update to a previous version. This can be done through the router’s admin interface. Refer to the user manual or Netgear’s support website for detailed instructions.

Device issues can also contribute to Wi-Fi problems. Make sure that both your router and the device you are trying to connect to it with are functioning properly. Restarting both devices can often resolve any temporary glitches or conflicts. Additionally, check if there are any software updates available for your device that may address compatibility issues with the router.

Effective Fixes for Netgear Ac1750 Wi Fi Not Working

Here are some effective fixes to help resolve the issue:

  1. Test internet access: Ensure that your internet service is functioning properly by connecting a device directly to the modem and checking if you have internet access. If the internet connection is working, the issue is likely with your router.
  2. Perform a factory reset: Resetting your router to factory settings can often resolve various issues. This can be done by pressing and holding the reset button on the back of the router for about 10 seconds. Note that this will erase all custom settings, so make sure to reconfigure your network after the reset.
  3. Power cycle the network: Turn off your router, modem, and any other networking devices connected to the network. Wait for about 30 seconds, then power them back on one by one, starting with the modem, then the router, and finally the other devices. This can refresh the network connection and resolve connectivity issues.
  4. Enable Wi-Fi: Ensure that the Wi-Fi function is enabled on your router. This can typically be done through the router’s admin interface. Refer to the user manual or Netgear’s support website for instructions specific to your model.
  5. Reboot devices: Sometimes, simply restarting the devices connected to your network can solve connectivity problems. Turn off any devices using Wi-Fi, wait for a few seconds, and then turn them back on.

If these troubleshooting methods do not resolve the Netgear Ac1750 Wi Fi not working issue, it might be necessary to contact Netgear support for further assistance. They can provide expert guidance and help identify any underlying hardware or software problems. If all else fails, considering a different router might be a viable option to ensure reliable Wi-Fi connectivity.

Possible Causes Fixes
Broken cable Check and replace damaged cables
Firmware update trouble Roll back firmware update or seek support
Device issues Restart both router and device, check for updates

Further Steps and Alternatives for Resolving Netgear AC1750 Wi-Fi Not Working

If the previous troubleshooting methods didn’t fix your Netgear AC1750 Wi-Fi issue, here are some further steps and alternatives to consider for resolving the problem:

  1. Contacting Netgear Support: If you’ve exhausted all your options and still can’t get your Wi-Fi working, reaching out to Netgear support can provide you with expert assistance tailored to your specific situation. Their team of professionals can guide you through advanced troubleshooting steps or offer recommendations for resolving the issue.
  2. Considering a Different Router: If all else fails and you still can’t resolve the Netgear AC1750 Wi-Fi problem, it may be time to consider investing in a different router. While this may require additional research, purchasing a new router from a reputable brand can potentially solve the connectivity issues you’re experiencing.

Remember, it’s essential to exhaust all available troubleshooting methods before considering these further steps and alternatives. By following the previous troubleshooting tips and seeking assistance when needed, you increase your chances of resolving the Netgear AC1750 Wi-Fi not working issue and regaining your online connectivity.


By following the troubleshooting steps and exploring alternative options, you can successfully overcome the Netgear Ac1750 Wi Fi not working issue and regain a stable and reliable internet connection.

If you have encountered problems with your Netgear Ac1750 Wi Fi, there are several common reasons to consider. It could be due to a broken cable, firmware update trouble, or device issues. To address these issues, there are several troubleshooting methods you can try.

Firstly, testing internet access is essential to identify any connectivity issues. Additionally, performing a factory reset can help reset the router to its default settings. Power cycling the network by turning off and on the router, modem, and other devices can also resolve connectivity problems. Furthermore, enabling Wi-Fi on your devices and rebooting them can help establish a new connection.

If these troubleshooting steps do not resolve the issue, it may be necessary to contact Netgear support for expert assistance. Their team can provide further guidance and help resolve any underlying issues. Alternatively, if all else fails, considering a different router may be a viable solution to ensure a reliable and consistent internet connection.


What are the common reasons why Netgear AC1750 Wi-Fi is not working?

There are several common reasons why your Netgear AC1750 Wi-Fi may not be working, including a broken cable, firmware update trouble, or device issues.

How can I troubleshoot my Netgear AC1750 Wi-Fi connection?

To troubleshoot your Netgear AC1750 Wi-Fi connection, you can try testing internet access, performing a factory reset, power cycling the network, enabling Wi-Fi, or rebooting your devices.

What should I do if the troubleshooting steps don’t fix the issue?

If the troubleshooting steps mentioned above don’t resolve the issue, you can contact Netgear support for further assistance. Alternatively, you may consider investing in a different router.