Are you facing the frustrating issue of Windows 10 displaying “No Internet Access” even when your internet is working perfectly fine? Don’t worry, we’ve got you covered with some easy solutions.
Troubleshooting Steps for Windows 10 No Internet Access But Internet Works
Let’s dive into the various troubleshooting steps you can take to resolve the “Windows 10 No Internet Access But Internet Works” problem and get your internet connection back up and running smoothly.
Step 1: Assign IP address manually
If you’re facing the issue of “No Internet Access” on your Windows 10 device, try assigning the IP address manually. Open the command prompt by clicking on the Start menu, typing “cmd” in the search bar, and selecting Command Prompt from the results. In the command prompt window, type “ipconfig /all” and make note of the IPv4 address, subnet mask, and default gateway.
Next, go to Network Connections by right-clicking on the Wi-Fi adapter in the taskbar and selecting Open Network & Internet settings. In the Network & Internet settings window, click on Change adapter options. Right-click on the Wi-Fi adapter, select Properties, then choose TCP/IPv4 and click on Properties. Select “Use the following IP address” and enter the IP address, subnet mask, and default gateway manually. Click OK, go back to the TCP/IPv4 properties, and select “Obtain an IP address automatically.” Click OK again to save the changes.
Step 2: Run the Network Adapter troubleshooter
If manually assigning the IP address doesn’t solve the problem, you can try running the Network Adapter troubleshooter. To do this, go to Settings by clicking on the Start menu and selecting the gear icon. In the Settings app, click on Update & security and then select Troubleshoot from the left sidebar. Scroll down and click on Network Adapter troubleshooter. Follow the prompts to diagnose and fix any network issues detected.
Step 3: Other troubleshooting methods
If the previous steps didn’t work, there are several other troubleshooting methods you can try:
- Reboot your PC and router to refresh the network connection.
- Disable any VPN connections that might be interfering with your internet access.
- Check your IP address settings to ensure they are configured correctly.
- Check your internet service provider’s status to see if there are any known outage or maintenance issues.
- Use Command Prompt commands to reset network settings, such as releasing and renewing the IP address.
- Temporarily disable any security software that might be blocking the internet connection.
- Update your wireless drivers to the latest version for improved compatibility and performance.
If none of these troubleshooting methods resolve the issue, it’s recommended to consult with a professional or contact Microsoft support for further assistance. Keep in mind that these are general troubleshooting steps and may not work for everyone. Patience and persistence are key when troubleshooting network connectivity problems.
|Step 1: Assign IP address manually||Manually assign the IP address, subnet mask, and default gateway to your Windows 10 device.|
|Step 2: Run the Network Adapter troubleshooter||Use the built-in troubleshooter in the Settings app to diagnose and fix network adapter issues.|
|Step 3: Other troubleshooting methods||Reboot your PC and router, disable VPN connections, check IP address settings, verify ISP status, use Command Prompt commands, disable security software, and update wireless drivers.|
Remember, if you’re still experiencing internet connectivity issues, it’s always best to seek professional help to ensure a proper resolution.
We hope these troubleshooting steps have helped you resolve the “Windows 10 No Internet Access But Internet Works” issue. If you’re still facing difficulties, it’s always recommended to seek professional assistance and remember that not all solutions may work for every situation.
If the issue persists, you can try resetting your network or using the Registry Editor (only for Windows 10 version 2004). These advanced options should be approached with caution, and it may be best to consult with a professional for guidance.
Remember, when encountering network connectivity problems, it’s important to remain patient and continue troubleshooting. Sometimes, the solution may require a combination of steps or further investigation into the specific issue affecting your system.
By following these troubleshooting methods, you can increase your chances of resolving the “Windows 10 No Internet Access But Internet Works” problem on your own. However, if you’re still experiencing issues, it’s always a good idea to consult with a professional who can provide more personalized assistance.
How do I manually assign the IP address to a client in Windows 10?
To manually assign the IP address, open the command prompt and type “ipconfig /all” to note the IPv4 address, subnet mask, and default gateway. Then, go to Network Connections, right-click the Wi-Fi adapter, select Properties, choose TCP/IPv4, and click Properties. Select “Use the following IP address” and enter the IP address, subnet mask, and default gateway manually. Click OK, then go back to the TCP/IPv4 properties and select “Obtain an IP address automatically” and click OK.
How can I run the Network Adapter troubleshooter in Windows 10?
To run the Network Adapter troubleshooter, go to Settings, then Update & security, and select Troubleshoot. Click on Network Adapter troubleshooter and follow the prompts to diagnose and fix any network issues.
What other troubleshooting methods can I try?
You can try rebooting your PC and router, disabling any VPN connections, checking your IP address settings, checking your ISP’s status, using Command Prompt commands to reset network settings, disabling security software, and updating your wireless drivers.
What should I do if none of the troubleshooting methods work?
If none of the methods work, you can try resetting your network or using the Registry Editor (only for Windows 10 version 2004). However, it’s recommended to consult with a professional if the issue persists.